Audio sync issue on SES3 (103W)

[ayelvington]

I have a GeosatPro MicroHD receiver, and I'm having an audio sync problem on SES3 (103W) on C-band. I use the same receiver for Ku with no problem. The sound/motion (lips, whatever) are off enough to make it look like a poorly synced kung fu movie all the time.

Is there an issue with this satellite? I use the HDMI output directly to my TV, so that isn't the issue.

Any pointers would be greatly appreciated.

Al

 

[Titanium]

Is this problem on certain channel(s) or all on C-band 103w?

Will the AV sync if the STB is tuned to another channel on a different transponder then returned?

Is there a difference in AV sync if on a channel with Dolby vs standard audio?

Using a HDMI doesn't guaranty AV sync. What is the Digital Audio Out menu setting? LPCM or Bitstream?

 

[DK_Sat]

I have 7.5' dish park on 103.0 w i have no audio sync problem, i am using a Coship Mpeg4 receiver.

 

[ayelvington]

Well spank me rosy! My TV is a native 720p, not 1080p like the newer ones. I set the STB to 720p, got a picture, and thought that was the end of it.

Not.

Changed STB to 1080p, got a picture, and the audio synced up. Go figure.

But WAIT, there's more! I went back to the program that I had recorded, and the audio synced up! Life is good since that didn't get wasted.

End of thread.