Advice on switches to use for legacy LNB's for 110, 119 & 129

[f13dfx]

All the LNB's I'm using are legacy, and as I understand it I connect 110 and 119 via a SW21X, and then I connect the output from the SW21X to port 1 on the SW21 and then the output from the LNB pointed at 129 to port 2 on the SW21. Then I connect the output from my SW21 to my receiver.

Can someone confirm that this is correct.

Thansk in advance!

 

[TheKrell]

It is definitely possible to drive a 3-sat 2-tuner setup with legacy LNB s and two SW-21's. You can even drive 4 tuners with legacy LNBs and an SW64.

 

[BobaBird]

f13dfx, that is correct. If the receiver is a dual-tuner, you will need all Dual LNBs, 2 of each switch, and 2 full runs of RG6.

More possibilities at EKB: Switch Selection