Recently one or both 722s have been hanging up waiting to reboot. They seem to be be accessing the EHD continually and do not respond to the remote. Unplugging the USB of the EHD or its power allows the 722 to continue but it still needs a front panel reboot. I think I'm going to have to unplug/power off the USB every night--annoying and would cause trouble using the remote access, if away. In one case, I waited out the access and after 10-15 minutes it did the reboot.
When trying to go to the timer list it may then show the unable to acquire guide data. The cure for that is to put up the guide and if there are only 2 programs filled per line move to the right and it will force a reload of the full guide.
Why is it acting differently? It is still on L622 in single mode as it has been for months.
-Ken
When trying to go to the timer list it may then show the unable to acquire guide data. The cure for that is to put up the guide and if there are only 2 programs filled per line move to the right and it will force a reload of the full guide.
Why is it acting differently? It is still on L622 in single mode as it has been for months.
-Ken
