Hello Boris,
Difficult to compare signal quality with different equipment and different TP beams.
Below is listed my equipment and results for 2 TPs on each Hispasat satellite.
I do receive more TPs than shown here, but these are my main used ones.
From the state of Nebraska (central United States). Lat = 41.6°N Long = 96.4°W.
1.2M dish, DG-380 H-H motor, Invacom QPH-031 LNBF, AZBox Premium Plus receiver, (FEC set to AUTO detect on AZBox.)
Hispasat 1C
TP 59 12052 V, SR 27500, FEC 3/4 Quality = 82-86%
TP 61 12132 V, SR 27500, FEC 3/4 Quality = 82-86%
Hispasat 1D
TP 79 11884 V, SR 27500, FEC 2/3 Quality = 87-93%
TP 80 11909 V, SR 7200, FEC 3/5 8PSK Quality = 86-90%
Hispasat 1E
TP 137 12052 H, SR 27500, FEC 3/4 Quality = 80-86%
TP 138 12092 H, SR 27500, FEC 3/4 Quality = 80-86%
My Hispasat satellite listing is not divided into the three individual satellites (1C, 1D, 1E) within my receiver listing. It is all one satellite (Hispasat @ 30W).
I separated the individual TPs out according to their parent satellite.
RADAR