In my RV I have a VIP211K with a Weingard Carryout dish. All was working yesterday.
I just hooked uo as always but only receive Sat 119. Ran a check switch and it shows
connected to a SW64 as normal, but having less satellites. Ran a Mwnu-6-1-3 and only
119 shows green. 110 and 129 have red x. Ran a Menu 611 110 shows strength of 46
but connected to wrong satelite 119. 129 does the same. Exactly same strength.
Took the cover off the dish and watched the initial power up process. Appears to move
normally and at the end appears to 'look at' each of the 3 birds. With the 211
I then ran a Menu 611 and selecteed 110,then 119, then 129. The dish did not move.
I can view Tv but only 119 channels. I also tried a new coax.
My question is which unit is failing? How does the command from the 211 get sent to
the dish? Problem is that I on the road with another month before returning home.
All help will be appreciated.
I just hooked uo as always but only receive Sat 119. Ran a check switch and it shows
connected to a SW64 as normal, but having less satellites. Ran a Mwnu-6-1-3 and only
119 shows green. 110 and 129 have red x. Ran a Menu 611 110 shows strength of 46
but connected to wrong satelite 119. 129 does the same. Exactly same strength.
Took the cover off the dish and watched the initial power up process. Appears to move
normally and at the end appears to 'look at' each of the 3 birds. With the 211
I then ran a Menu 611 and selecteed 110,then 119, then 129. The dish did not move.
I can view Tv but only 119 channels. I also tried a new coax.
My question is which unit is failing? How does the command from the 211 get sent to
the dish? Problem is that I on the road with another month before returning home.
All help will be appreciated.