Search results for query: *

:angel: Eureka!!! :) Finally got it working; will tell you how I fixed it took antenna apart, hit it several times with the fist wrapped in towel from inside where it looked slightly warped, installed back and voila! 118 is there, weak signal, one channel was working. Reinstalled on the side...

so could that be that internationals are assigned to florida spotbeam, that is why i am not getting them!!!

yes, from about 80 to 300, LMN, 170's for kids, 200, s news, weather and some in 8000 range. Locals from 2 are in the subscription, but i am only getting quide but no channel just info panel from DN

yes i am getting lots of channels e.g from about 80 to 300, 170-180 kids, 200's - news; weather, LMN etc and some in 8000 range but do not remember those

OK, did the shopping; 33 oval aftermarket dish with single lnb $48; will connect to port 2 on DP34 instead of DN circular LNB, other 2 will leave connected to 500+ sat 110 and 119 if this won't work - harakiri; Someone in other forum said that card might be needed to reset - this receiver...

ok, will post; just tell me why?

Smith, why do you need DNSP number, i can not post it on internet as some spy from dish network may cut my service, maybe it is Iceberg. my fw is 438. I get 110 and 119 signal - weak but working. As of now no change. Anyway, i connected 118 directly and did not see any signal. i want to...

to peano; yes, mine is original 500+ from dishnet with 2 lnb's one double (glass front) for 118

thanks peano and Smith; Called my relatives in Florida - they have same dish and verified some strengh on tp's they have double my signal in 80's on 119 and even higher on 110, 40 0n 118. Mine on 119 is 35, I tried everything, connecting one cable only to each LNB but not getting higher...

hi again; I hooked up my receiver to old dish 500 with 21 switch and got just 110 but signal much stronger almost double. Reconnected my new 500 plus but the same problem, no signal on 118, verified software level on receiver, did check switch with no cable to clear matrix on receiver...

Thanks for all the help Smith. Looks like I am not welcome on this site and I am not a crook as your buddy insinuates.

are you going to help me or insinuate something?

Well, you are wrong again, FTA channels come and go, nothing is forever

Hi Iceberg, you are wrong on the stealing comment, I am paying for my service in your country as Canada does not have enough programming going through hoops to do it, FTA just did not provide enough options. What is that DNASP that Smith is asking? Where are ur classified, I just see Bell...

when was the swap? I got it a few weeks ago, because lost all FTA's in the spring

total disaster today In my case strangely, I get very good signal on 110 - 60 on meter went up, took a dish apart and put it back together, than tried connecting without switch, just one cable to 119, went down and did check switch anyway as signal did not lock, it did not lock anyway...

thanks guys, I got 2 LNB,s, one big with crystal eye, system was purchased recently from dishnet, lnb's are pro. Went on the roof, checked dish, repointed, weak signal on 119 - 30, better on 110 - 50, and no signal on 118, also 118 still shows 110 signal after checking switch on some tp,s on...

Peano, thanks for reply; I tried everything, dowloded DISH POINTER application on iphone, verified there are no obstructions, yesterday I even changed cables, I used the one that was installed by local installers and it worked at that time. As of now I get up to 30 signal strengh on 119...

Hi guys; Could you help me to set up dish in Canada I just bought 311 DISH Network receiver with 30 inch eliptical dish in Florida and trying to set it up in Toronto, Canada. I get 50 signal on 110 and 29 on 119, however I am unable to get 118.8. Account is registered in Florida and I...