Search results for query: *

But the real question should be, is there anything in there against your helping someone else bring a product to market? :shh

The E! news forecast agrees! :lalala

I honestly think that ship has sailed and will have a hard row back if ever. With all the inconsistencies that Eugene had in his statements and the way he treated people, (Customers & Dealer), I would never buy from him again, nor could I trust Satellite AV for anything he says. I would gladly...

Hope you have better success then others did ! If they use the HiSilicon 3796 then they will be obsolete before launch. They have stuttering issues with the 60 FPS UHD . Nor can they record UHD, and they can't handle 10-bit (High Dynamic Range). Nor will they do the ACM channels on 125°W...

Sad to hear that people are still suffering over the 3500 receiver. I would have thought that by now people would have seen the truth. The 3500 receiver may be good for a single satellite reception but it is definitely not a receiver for any FTA BUD hobbyist! I did not fault Brett for exposing...

Since I use a receiver to move the dish and change polarities here is how I set it up here. Both C & ku line from the dish go into an HFS (High Frequency Splitter) near the back of my main dish moving receiver. The power side out on the HFS goes to the main dish moving receiver either C or KU...

At one time both these channels were in the same mux. Then they changed. if you have 3790 in the receiver with sid 1 that is KCHF. However if you delete it out and manually add 3789 (1666) you will scan in KCHF, Now manually add 3792 (1666) and it will add the other channel KNLC which scans in...

Thanks Brian for the hints there. Just went in and deleted the TP list for that sat I mentioned. This time used only "normal mode" for the scanning instead of the "detailed mode" which is what I have been using. This time it located all the channels using normal scan mode that it did not...

Bump*** anything new on this? Last night I was at 97.0 and saw that the Micro was missing 6 different freq.'s from the blind scan. on V side C-band. 3839 3843 3851 3923 4005 4009 all these were active and scanned in fine on another receiver but not the micro hd. Scanning is always done using...

Same here: ** Did not scan in :: 3804:: V:: 4167 :: 3/4 :: DVB-S/QPSK * Yes Scanned in with Micro HD :: 3931:: V:: 14062:: 7/8 :: DVB-S/QPSK ** Did not scan in :: 3810:: V: 3077 :: 3/4 :: DVB-S/QPSK ** Did not scan in :: 3813::V: 2351 :: 3/4 :: DVB-S/QPSK ** Did not scan in...

There are many different questions put out here so to try answering them is not going to be easy as there is not enough info on some of what is being said. first: for MarkVA: Have you checked your satellite settings? It is possible they changed when you put in the firmware. Also check...

I really don’t know why so many have the problems they list here in this thread. I have several premium plus receivers and an ultra and do not have any of these hassles. However, I must say that I also have created my own sat/channel lists and also deleted all the garbage transponders that...

Going back over the last few posts I went back to see exactly when those receivers came in here. One plus receiver was bought in 2010 and 2 more plus receivers arrived here in 2011. None arrived later than July of 2011 according to my records. There was never any question then on vents on...

Keith, The big difference is that the op did specifically call out as "confirmed" clone seller in post #3 as one being WWS. Evidently that was not really "confirmed" but their suspicion without it being "confirmed". Many times they were asked (by others here), to apologize for that but they...

Thanks Keith, I edited my post after I took the time to visit that site and see the photos for myself. If the op would have done their due diligence they would have seen this for themselves but choose instead to tear apart their own reputation by the falsehoods they kept spouting off without...

On the back side of the azbox there is also a stamp (not a white label as is on the underside) and it shows the model and distributor and my premium plus receivers with both types of vents say the distributor as "OpenSat Lda." That is located above the HDMI input on my receivers. oh someone...

Keith, Since you know of someone with the clone unit, ask them if there are any indicators on the receiver itself ie... labels or stamped as to the origin of the receiver or company name. If they kept the original box it came in that may also indicate where it was from and the difference...

I have seen nothing to date them by without taking off the entire top casing. I have had these Plus receivers long before they went out of production. So the vent holes have had differences long before Opensat even stopped the Az Ultra production. The outside box the receiver comes in also...

If you can not read your own accusations then you should not be posting. You sir started this entire mess with your accusations and innuendos. I would not trust buying anything from your business if my life depended on it at this time from all the dirty tactics you have tried to pull over...

Also on the premium plus receivers, if one takes off the top cover where the internal hard drive goes you will find the 256 mb chip connected to the motherboard that also has the opensat name on it with the firmware it had from the factory installed in it. Rick does not sell clones. Pwrsurge...

There is one simple way to determine if the box is original or not. I have looked at all my receivers and the original outside black box they came in all show they were made in Korea and each receiver has the opensat label on the bottom of the receiver itself. This is on the Premium plus and...

There is one simple way to determine if the box is original or not. I have looked at all my receivers and the original outside black box they came in all show they were made in Korea and each receiver has the opensat label on the bottom of the receiver itself. This is on the Premium plus and...

To make it quicker there are a couple of things to remember. 1) delete all but 1 tp from the sat then scan. 2) scan only 1 polarity at a time. This will decrease the time to scan. The firmware in the azbox has old outdated info in the tp's which it goes over every time so deleting everything...

Noticed using the latest firmware 1_31_2013 that some channels on SES-1 would scan in proper freq/SR and fec but the pids were different and channels would not play. this occurred on 3710 V manual entry of 3710 pids plays fine even when leaving that channel and going back but... not so on...

Thanks for the clarification. since the receiver is never plugged in all the time that part is a given.