OTHER Freesat v7 Galaxy 19 channels not showing

  • Server Issues.

    We are very aware that there have been system issues the past few days. In troubleshooting the system, it has been determined that the issue is at our provider and is hardware related. As of 12:05 PM ET our provider has moved us to a new server.

    Things seem to be running better on this new server. However in trying to diagnose the issue (before finding out it was a hardware issue) we made some system changes which we need to undo. So if you find any issues or errors please let us know in the Operations Center Forum.

    Thank you for your patience! Sorry for the issue!
    CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE

oabdullah

Member
Original poster
Apr 20, 2018
5
1
Houston, Texas
I just got the Freesat v7, but the Galaxy 19 satellite is only scanning 24 channels (most of which are not free to air). My old receiver scanned all the channels properly, but unfortunately that receiver broke recently. I have the correct preset, but is there something I have to add in transponders or something? Thanks.
 
What type of LNBF do you have? Standard (LO 10750) or Universal (LO 9750/10600)?

Is the LNB type in the Install Menu set to match your LNBF type?

Perform a Blind Scan and not a TP or Satellite scan of all Free channels. This should log 200+ channels.
 
  • Like
Reactions: oabdullah
What type of LNBF do you have? Standard (LO 10750) or Universal (LO 9750/10600)?

Is the LNB type in the Install Menu set to match your LNBF type?

Perform a Blind Scan and not a TP or Satellite scan of all Free channels. This should log 200+ channels.

IF it will even finish a full satellite blind scan without locking up that is!! I gave up on mine last year and have only put known TPs in it one at a time and then scan them since. Like I've said before, they are junk, but, you get what you pay for!!:deadhorse2
 
:welcome to SatelliteGuys oabdullah!

Yes, those receivers are not much, but I have seen them work better than that. Double check that everything is correct.
Give me an example of what channels it is showing, especially the encrypted ones you speak of.
 
  • Like
Reactions: oabdullah
:welcome to SatelliteGuys oabdullah!

Yes, those receivers are not much, but I have seen them work better than that. Double check that everything is correct.
Give me an example of what channels it is showing, especially the encrypted ones you speak of.

I've uploaded a photo album of what is going on on imgur. Hopefully that's okay.
Images

To add on, I've tried setting LNB power to H and V also, tried different LNB freq such as 9750,10750, messed around with the DiSEqC ports, etc.
 

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)

Top