I miss being able to check the analog KU and C band stuff, since I got into fta tv. What kind of wiring problem is it to get digital and analog out of 2 sep systems? Here's the way I have it now. Sep 10'dish for c=band analog (Gen Instruments 650I ) + a KU-only setup using a GI550I analog. rec and 5'dish. I watch ku=fta 90% of the time anyway but I'd like to be able to see what is on c-band digital easily without unplugging the diseqc switch and plugging the cband lnb direct to my Ultra, Shutting off everything and cable-pulling is a hassle, and since I also have 3 sep primestars (fixed) run to the diseqc switch I have no more open ports to use.
Any ideas, what else to do, or switches to buy? I can do without the G10=primestar and open up a port on the diseqc I guess, G10 is fine on the bigger ku dish, but the primestar actually gets me 10 signal quality points higher than the bigger ku dish that has its own motor. And I know that the lnbs will have to go to the diseqc first since both the Ultra and the analog rec cant power the lnbs at the same time.
Any ideas, what else to do, or switches to buy? I can do without the G10=primestar and open up a port on the diseqc I guess, G10 is fine on the bigger ku dish, but the primestar actually gets me 10 signal quality points higher than the bigger ku dish that has its own motor. And I know that the lnbs will have to go to the diseqc first since both the Ultra and the analog rec cant power the lnbs at the same time.
