I have not tried, but will my regular KU LNB work on Anik G1? I have read some LNBs will work outside the posted frequency range? Thanks.
Will a regular KU LNB receive G1?
- Thread starter mwdxer1
- Start date
- Latest activity Latest activity:
- Replies 9
- Views 1K
- Status
G1 and F1 are in the same location but that is Shaw TV, all encrypted. Nothing to see there anyway.
The people over at Lyngsat seem to think it exists.
Anik G1 at 107.3°W - LyngSat
It was launched on April 15, 2013.
Perhaps sathint.com doesn't try so hard with birds that have virtually nothing in-the-clear?
G1 is using lower Ku (10.7 to 11.7 GHz), so a Universal LNBF might work. but I don't know what type of LNBF is normally used with Shaw's systems. A standard LNBF will most likely not work since they start at 11.7 GHz
about standard LNBF working outside of their normal range, what i have seen is that many standard LNBs that are supposed to cut off above 12.2 actually work up to 12.7. But not below their normal range
about standard LNBF working outside of their normal range, what i have seen is that many standard LNBs that are supposed to cut off above 12.2 actually work up to 12.7. But not below their normal range
If nothing is in the clear on G1, then I guess why bother. At least on the KU side on F1R there are a few channels. I did not know everything was scrambled on the G1 section. Thanks.
- Status
Similar threads
