WiFi and Bridging

[bwexler]

It seems that I could not bridge my second hopper when the first was connected by WiFi.
the installer said if using WiFi you need an adapter on each device or a HIC.

Can anyone enlighten me? Previously in my motorhome I had wired Ethernet and bridging enabled, which worked just fine. In the house I have not yet attempted to fish the Ethernet through the walls.

 

[3HaloODST]

Hit YELLOW - BLUE - SELECT - RED - choose MoCA - Hit BLUE - BLUE - select Bridging and enable on the WiFi-connected Hopper.