Tuner 2 or just tuner 1

[HoppertheKangaroo18]

I have a dp twin 500 with port 1 going to my 612 *upgrading to a hopper duo soon* and port 2 going to tuner 2 on the reciever. Port 1 is tuner 1. Every time I check switch it says there's a problem and just shows an X and conn on 119. 110 is ok but only on tuner 1. There's no sats for some reason on tuner 2

 

[HipKat]

You have a 20-year-old LNB that's not even supported any longer on a 20-year-old receiver that's also not supported any longer.
They don't last forever

 

[HoppertheKangaroo18]

You have a 20-year-old LNB that's not even supported any longer on a 20-year-old receiver that's also not supported any longer.
They don't last forever

The reciever is from 2008 so idk how that's 20 years ago

 

[Ronnie-]

The reciever is from 2008 so idk how that's 20 years ago

Its certainly not far off of 20.

 

[HoppertheKangaroo18]

You have a 20-year-old LNB that's not even supported any longer on a 20-year-old receiver that's also not supported any longer.
They don't last forever

 

[HipKat]

That bent reflector is not doing you any favors

 

[HoppertheKangaroo18]

That bent reflector is not doing you any favors

It's a picture from Google. Also they still use the 500 because that's a 500 from 2015

 

[HipKat]

It's a picture from Google. Also they still use the 500 because that's a 500 from 2015

I wasn't talking about the Dish. I was talking about the LNB. For one thing that is a standard definition LNB, which has not been used for years.

 

[HoppertheKangaroo18]

I wasn't talking about the Dish. I was talking about the LNB. For one thing that is a standard definition LNB, which has not been used for years.

How if it's on a dish being used in 2016 to 2018