I have been both a 6000 user and a 811 user and I have had personal experience with this bug over the last couple of years. I have also read most of the different opinions as to what might be the cause and the different work arounds that people have suggested that work for them. I have also read the replies that some of the work arounds do work for everyone.
Most people feel that the problem appears when the 811 has sat on a OTA channel for an exteneded period of time. Though this maybe the case for a lot of folks, I have seen this issue appear when trying to change from a non OTA channel and have seen it appear without sitting on a channel for a long time. I also have seen it happen when switching between two Dish based SD channels. I watched the transponder numbers and there is no pattern there.
Here is my take given everything I have read and witnessed myself
1) The issue is not caused by sitting on an OTA for a period of time. This may be a symptom, but I have seen other scenarious result in the same symptoms.
2) The work arounds may or may not work for you.
3) Based on the different symptoms I have seen, this bug is more random in my opinion.
Thoughts? Can anyone reproduce this problem in 100% of the time with a given procedure. If you can post here and hopefully Dish will try and possible get to the root cause. Then again, Maybe the root cause is one that cannot be fixed in software.
Most people feel that the problem appears when the 811 has sat on a OTA channel for an exteneded period of time. Though this maybe the case for a lot of folks, I have seen this issue appear when trying to change from a non OTA channel and have seen it appear without sitting on a channel for a long time. I also have seen it happen when switching between two Dish based SD channels. I watched the transponder numbers and there is no pattern there.
Here is my take given everything I have read and witnessed myself
1) The issue is not caused by sitting on an OTA for a period of time. This may be a symptom, but I have seen other scenarious result in the same symptoms.
2) The work arounds may or may not work for you.
3) Based on the different symptoms I have seen, this bug is more random in my opinion.
Thoughts? Can anyone reproduce this problem in 100% of the time with a given procedure. If you can post here and hopefully Dish will try and possible get to the root cause. Then again, Maybe the root cause is one that cannot be fixed in software.