splitting signal

[bearingman07936]

I'm not sure that this is the right forum for my question, but here goes. We have our main receiver (now an H21-700) that feed to a 5545 Channel Plus Channel modulator. We also have feeds from a Blue Ray player, and a VCR. This feeds to three TV's in the house. Out from the Channel modulator, we have a 1 to 3 splitter to go to those 3 TV's. Those TV's aren't HD or even digital, but we are considering upgrading the one in the kitchen. I know that I can't get HD feed through that modulator, but are there new splitters out there, or even new modulators out there that we might be able to upgrade to someday, that would pass the HD signal without too much loss? Right now the set-up allows us to take the digital signal and convert it to an analog so the three TV's can play it.
We do have one LCD flat screen that is hooked up directly to the satellite receiver via HDMI, so we have the one TV where we can see HD broadcasts, so not having it on the others is not really a huge problem.

 

[Zynergi]

There is a HDMI Splitter you could use, but you would have to run a HDMI cable to the new room.

 

[jtk557]

how about using coax as component cables?

 

[iwc5893]

how about using coax as component cables?

You could, but why would you? You can get component cables in long lengths and you don't have to try and put on the ends.

 

[jdspencer]

And if you do use component, remember to run audio as well.

 

[iwc5893]

And if you do use component, remember to run audio as well.

I forgot about that...nothing like running 5 coax cables to one TV.