Sony Satellite Dish?

M-2 Hydra

SatelliteGuys Family
Original poster
Jul 18, 2019
45
12
Louisiana
i have found a satellite dish at the back of my yard attached to a tree and it appeared to be a Sony intact with lnb but i wonder what i would need to power it on i want to see if it at the least can find a satellite i have taken it apart and cleaned it and it appears to take 13 volts on the little sticker on the reflector model number : SAN-18S1. DSS (Digital Satellite System
 
  • Like
Reactions: spongella
It was likely used for DirecTV and is a circular polarity LNBF with 13/18VDC polarity switching. The LO is 11250.

You might find a few unencrypted channels on a Dish Network satellite with a DVBS FTA receiver, but it is the wrong frequency and polarity for receiving FSS Free To Air services.

Rather old school dish, but should receive something with a DirecTV or DishNetwork receiver and aimed at the correct subscription satellite.
 
Ahhh the days where you could choose and own your own equipment!

That is exactly why I am so anxious to try the new Orby service. I have ordered my choice of dish and LNB and when it arrives, I can put it up myself without dealing with some random guy who thinks he knows more about it than I do. Well, to be honest, the equipment for the major satellite providers has gotten so complicated that it is beyond my knowledge set. Plus there is no contract or credit check just like in the early days of satellite TV.
 
That is exactly why I am so anxious to try the new Orby service. I have ordered my choice of dish and LNB and when it arrives, I can put it up myself without dealing with some random guy who thinks he knows more about it than I do. Well, to be honest, the equipment for the major satellite providers has gotten so complicated that it is beyond my knowledge set. Plus there is no contract or credit check just like in the early days of satellite TV.
sounds neat
 
It was likely used for DirecTV and is a circular polarity LNBF with 13/18VDC polarity switching. The LO is 11250.

You might find a few unencrypted channels on a Dish Network satellite with a DVBS FTA receiver, but it is the wrong frequency and polarity for receiving FSS Free To Air services.

Rather old school dish, but should receive something with a DirecTV or DishNetwork receiver and aimed at the correct subscription satellite.
It’s not going to work anyway because there was water inside the lnb and corrosion and when I accidentally dropped it something fell off the circuit board oh well.
 
That is exactly why I am so anxious to try the new Orby service. I have ordered my choice of dish and LNB and when it arrives, I can put it up myself without dealing with some random guy who thinks he knows more about it than I do. Well, to be honest, the equipment for the major satellite providers has gotten so complicated that it is beyond my knowledge set. Plus there is no contract or credit check just like in the early days of satellite TV.

I built a dual dish system for Dish Network and I own all of the equipment. Dish authorized my ViP 211k no questions asked. I have a Winegard 76cm aiming at Echostar16 (61.5W) and a 1 meter aiming at Nimiq5. I have no idea of how DirectTV behaves, but Dish doesnt care as long as they get a subscription.
 
Yes, I used the Winegard 2076 and GeoSat Pro SL-1 PLL LNB. It it cost a little bit more than what Orby would have supplied but the signal does not even fade during a heavy West Texas thunderstorm.
 

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)

Top