I'm in a fringe location with one channel (two subchannels) that come in somewhat reliably... Planning to do some tests to see if there is a better location for my OTA antenna, I needed a converter box to go with my little 13" TV so I can do this all outside.
So make the 45 min drive to the former Radio Shack. They have one generic converter box, I decide to take it. I'm talking with whom I presume is the store owner about antennas, my testing plans, tell him what I have (Antennacraft Y-10-7-13) and what I receive. He describes the antenna he is using, I say '8-bay'. He pulls it up online, it's an 8-bay antenna... I ask how is it on UHF, he proceeds to tell me that it's specially designed for 'Digital' signals. At this point, I'm thinking I'm done with this conversation. He continues on with something about receiving stations from Arkansas (we're in SE KS so it may be possible) but I'm done listening.
I leave the Radio Shack and across the street is a TV/electronics shop. The sign on the store has 'Zenith' across the top, so I figure it's been established awhile. I haven't had a chance to visit this place yet and it's open. In the window is a Channel Master antenna rotator, it's an old store so I begin to think this may have promise. Go in and start talking with the owner. Ask about the antenna rotator and he says he'll only sell Channel Master because the others don't hold up. Then he says that the antenna rotators last a little longer now because the 'Digital' antennas are lighter and don't stress the motors... I thank the guy and leave.
Even though there may be some merit in the last guys statement, I'm thinking the antenna is not lighter because it's a 'Digital' antenna.
Should I expect more or is this really just how it is?
So make the 45 min drive to the former Radio Shack. They have one generic converter box, I decide to take it. I'm talking with whom I presume is the store owner about antennas, my testing plans, tell him what I have (Antennacraft Y-10-7-13) and what I receive. He describes the antenna he is using, I say '8-bay'. He pulls it up online, it's an 8-bay antenna... I ask how is it on UHF, he proceeds to tell me that it's specially designed for 'Digital' signals. At this point, I'm thinking I'm done with this conversation. He continues on with something about receiving stations from Arkansas (we're in SE KS so it may be possible) but I'm done listening.
I leave the Radio Shack and across the street is a TV/electronics shop. The sign on the store has 'Zenith' across the top, so I figure it's been established awhile. I haven't had a chance to visit this place yet and it's open. In the window is a Channel Master antenna rotator, it's an old store so I begin to think this may have promise. Go in and start talking with the owner. Ask about the antenna rotator and he says he'll only sell Channel Master because the others don't hold up. Then he says that the antenna rotators last a little longer now because the 'Digital' antennas are lighter and don't stress the motors... I thank the guy and leave.
Even though there may be some merit in the last guys statement, I'm thinking the antenna is not lighter because it's a 'Digital' antenna.
Should I expect more or is this really just how it is?