First, I recently upgraded from a ProCenter 1000 (4.5" woofers) to a ProCenter 2000 (5.25"). Really like the sound increase from the center, and it allows me to go 60hz on that xover, as opposed to 100 (per Def Tech). Much more full sound.
Next, one of the ProMonitor 1000's went down in flames. I coulda sent it in, but Def Tech sent me the replacement woofer instead because I said Id do it myself. Took about 6 days, from start to finish for it to get here, during the holidays, so im impressed.
New 5.25"
ProMonitor partly apart
Old woofer; cone tore from adhesive at base
New woofer
Another internal shot
Inside of back and planar woofer on top
Finally. I decided to setup the xovers per Def Tech (100hz for monitor and 60 for center), let the rcvr set distance (its very accurate when checked versus a tape measure), set trim levels with an SPL meter, and cut Audyssey completely off. Pretty darn happy.
Next, one of the ProMonitor 1000's went down in flames. I coulda sent it in, but Def Tech sent me the replacement woofer instead because I said Id do it myself. Took about 6 days, from start to finish for it to get here, during the holidays, so im impressed.
New 5.25"
ProMonitor partly apart
Old woofer; cone tore from adhesive at base
New woofer
Another internal shot
Inside of back and planar woofer on top
Finally. I decided to setup the xovers per Def Tech (100hz for monitor and 60 for center), let the rcvr set distance (its very accurate when checked versus a tape measure), set trim levels with an SPL meter, and cut Audyssey completely off. Pretty darn happy.
Last edited: