SES-3 & Horizontal Issues

[arlo]

Just wanted to say Thanks to ya'll. I'm a trucker and didn't have chance to work on the issue.

So I started from "scratch", taking all your suggestions in account. Got a new LNB, placed dish on one of my fence poles, extended the LNB arm with PVC pipe, skewed the dish (vice the LNB). Locked onto the bird on the Vertical side and made some small adjustments.

Using my satlink WS-6906, was able to get 87%+ signal but Quality was below 20% on the H TPs. So I connected to Sat RCVR and "boom" had lock on TP 11760. Made slight skew adjustment and then locked in on TP 11880.

Looks like my WS-6906 does not like Horizontals.

Thanks again ya'll.

A trucker! The mainstay of commerce.
For "shifts and giggles" try aiming your LNB lower towards dish center.
To me it looks like it might be shooting more towards the logo than the dish center.
It might explain why you're losing H signal strength. Mine did very well on both polarities.