Serious Help Needed.

Status
Please reply by conversation.

Neeraj_fiji

New Member
Original poster
Feb 4, 2009
1
0
Seattle, Washington
Heelo guys,
I came across this forum from yahoo answers after hours of research. I have searched everywhere and someone from yahoo told to me to come here. I have searched through this forum but found no thread which helps a noob. Well here it is. Im really interested in FTA. Have little idea how it works. So far I have found out that i need a reciever, lnb, dis and motor to get started. Which ones I have no clue. Some guys mentioned to get smart search but there are so many. So if some one can please tell what I really need or suggest me a good system(whole setup) and where i can buy it so I can get started. I leave in seattle washington and we are very much in interested in getting channels from asia(india). I would really appreciate anyones help. Thanks A Million. :)
 
You can check with some of the sponsors here, listed at the top of the page. You probably can pick a fixed dish setup (no motor) as most of the international channels are on one satellite (97west-Galaxy 19). Not sure how many are Indian-originated but there are some.
I'll try to find a listing and edit my post.
A good simple receiver to start with would be the Mercury Dynamic, Traxis 3500, there are many manufacturers both those are two user-friendly boxes with blind scan feature, which is most useful feature.

edit: here's one list of free to air channels :
http://www.global-cm.net/MPEGlistKuBandUS.html
scroll down to the Galaxy19 listing, satellite name is in the middle of the page.....see if any of those channels are of interest to you.
 
Status
Please reply by conversation.

Regarding DiSEqC

Blind Scanning Radio Mux?

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)

Latest posts