Satmex 5

[GreatFTA]

I know, everyone had probably bought up this satellite several times on this thread. Please bare with me on this one...
I can get G10, T7, and other western satellites great. The G10 and T7 have like 75 to 85% quality strength, so I figured I should get the Satmex TPs in great.
Wrong...
I don't get any quality signal strength at all and I spent countless hours trying to bring this bird in.
What am I doing wrong?
The G11, and T6 birds get from 55 to 65% quality strength. I wonder if I have to turn the dish mount a degree or two, or adjust the dish itself...
I want to check with you guys on this before boogying up my system.

 

[PSB]

Make sure you are within the footprint............



http://www.satmex.com.mx/img/flota/satmex5_ku2.gif


BYU is FTA

DFreq. 12163

Pol. H

SR. 3935

http://www.lyngsat.com/sm5.html

Signal Quality low at 66% here in MN.

 

[GreatFTA]

Thanks PSB. I figured me living in north Mississippi I would get this bird ok. I did when I was on the C band part of the BUD. I was getting the C band frequencies, I know. I just not having any luck with the Ku setup, with the Primestar 1 meter dish and Invacom .3 LNB (universal).. Thanks for the TPs. I will try again this weekend...