S Sm-24

[Rick in MD]

OK, I have one of these from Sadoun http://www.sadoun.com/Sat/Products/S/S-SM24-2x4-multi-switch.htm (not sure why I bought it at the time) I want to take my motored dish, and connect it plus another LNBF to it. Can I, not sure if I am explaining this correctly.. But I can't get to G10 and the rest of the ARC from the HH motor, and I want to setup a single dish and LNB for G10 and also connect to the HH motor at the same time to the same recv.

Rick

 

[Sadoun]

This is not the right switch to do that. There are 2 inputs (H and V) and 4 outputs on the switch. The inputs are used to connect a dual LNBF. The outputs allow you to hook up up to 4 receivers. Also, this switch can be used if you have an dual output LNBF with V on one of the outputs and H on the other.

In your case, you really need a 2-way DiSEqC switch.

You install the DiSEqC switch between the motor and the 1st LNBF. Then you connect the 2nd DISH to the 2nd input on the DiSEqC switch.

 

[Mr Tony]

Rick
That switch works if you have a dish at G10 and want to hook 3 recevers to it....thats what I did for a while.

 

[Rick in MD]

Gotcha, Looks like I had it all backwards (In my mind it was all OK) for the setup I envisioned.

Thanks
Rick