Ok here goes, I just lost a second 622 to a failed HDMI port. My first 622 (Installed Dec 06) went out after the power flashed off for a minute or two (I get frequent, short power interruptions here). The failure was different than what others have posted, I would get a picture and audio, but the picture and sound would blink off for about half a second every 2-3 seconds. Last week I replaced that with a brand new 622, fresh from the factory, this one even said HDMI on the back instead of digital video out.
Fast forward to today, the power went out again for a couple minutes, and when it came back on I had the same exact problem with the HDMI port! All other outputs work, except the HDMI port blinks on and off again! I tried unplugging the tv and 622, and I continue to have the same problem.
I know, I know, I should of had it on a UPS! I am going to pick one up now! Can anyone recommend a reasonably priced UPS for my 622 and JVC D-ILA? I was going to get one to protect the bulb on the tv but never got around to it...shame on me. Anyone have any other ideas?
Fast forward to today, the power went out again for a couple minutes, and when it came back on I had the same exact problem with the HDMI port! All other outputs work, except the HDMI port blinks on and off again! I tried unplugging the tv and 622, and I continue to have the same problem.
I know, I know, I should of had it on a UPS! I am going to pick one up now! Can anyone recommend a reasonably priced UPS for my 622 and JVC D-ILA? I was going to get one to protect the bulb on the tv but never got around to it...shame on me. Anyone have any other ideas?