Remote conflict with H20 and R15

[THX1138]

This is my first post. I had my HD system updated this past Sunday. They put in the H20 and the R15. Now I have a problem, the remotes are the same and I have been unable to find a solution. Both of these units sit in my cabinet. I have tried changing the code. It will not work. Any Help?
Thanks
THX1138

 

[boba]

The R15 uses a RC23 remote and the H20 uses a RC24 remote the Rc24 is capable of IR or UHF. Follow the instructions for setting the H20 up for UHF no more remote problems.

 

[THX1138]

Thank You for the quick reply. It worked

Again thanks for the help. I did as you sugested and now everything is correct.
Someone should let D know about this as they said I was stuck.
THX1138

 

[Edmund]

Setting the H20 to RF, prevents the RC23 remote from controlling the H20. but the RC24 emits both Rf & IR at the time, so it should still control both receivers. But setting the R15 to AV1/AV2 codeset, code 00002, will stop the conflicts.

 

[boba]

Setting the H20 to RF, prevents the RC23 remote from controlling the H20. but the RC24 emits both Rf & IR at the time, so it should still control both receivers. But setting the R15 to AV1/AV2 codeset, code 00002, will stop the conflicts.

Sorry but you are wrong the RC24 outputs either IR or UHF not both for the satellite. I have this setup in my showroom, I also have a D11 and use AV1 so the three receivers can be used without interferrence. Directv is aware of this shortcoming but so far hasn't done anything to correct it.