Okay so I got out there this morning and rolled up my sleeves at got to work. My actuator is made by a company named JGS btw, found the sticker when I took the rubber cap off. I found the sensor wires with on the bottom under the flat plastic casing. So, I proceeded to take the plastic bottom piece off. The screws were rusted and wouldn't move, even after spraying them with PB Blaster. I would turn the screw and the head of the screw would just strip away. So, I decided, I would just bust the plastic around the screw...I figured if the motor is bad I'll be buying another one anyway. Once I got inside I found the wires from the actuator and found that this whole time the ground of the sensor was orange, not black. Wow, I felt stupid. Once I wired it up with green and orange, it works perfectly. And this GBox is FAST!!!! So thanks for the help everyone! My system is working perfectly now!
