Pressing the rewind button jumps waaaaaaaayy back

[NABRIL]

Hello
Hopper 3, with wired joeys 2, and 52.0 remote. The joey has software version J272.
As I watch a program from OTA channels or satellite channels, pressing the back rewind button EVER SO SLIGHTLY, jumps way back to the beginning of when I tuned to that channel; it's as if I held it down using SUPER THUMB. It happened with another remote, so I paired a newer remote that wasn't used as much = same result.

Is this a software thing? Or is my thumb that powerfully strong?

thank you

 

[cpdretired]

No it's not your thumb. I've been watching an OTA channel for 30 minutes. Press the back button some times it will go to the time I tuned that channel. Thirty minutes ten minutes whatever.

 

[Jim5506]

Unplug your Hopper, wait 30 seconds, re plug the Hopper and let it restart. Might be a transient software glitch that rebooting fixes.

That's always the first thing to do when Dish hardware goes wonky.

 

[NABRIL]

Unplug your Hopper, wait 30 seconds, re plug the Hopper and let it restart. Might be a transient software glitch that rebooting fixes.

That's always the first thing to do when Dish hardware goes wonky.

Thanks Jim
I killed the power to it, not unplugged, a few days ago. Would that count?

 

[Jim5506]

Thanks Jim
I killed the power to it, not unplugged, a few days ago. Would that count?

Flipping the breaker, turning off the power strip and the like are all effectively the same as unplugging, assuming there is no UPS on the line (uninterruptible power supply).

 

[Josh.M]

This is a software issue we're aware of and working on correcting.

 

[cpdretired]

Hello
Hopper 3, with wired joeys 2, and 52.0 remote. The joey has software version J272.
As I watch a program from OTA channels or satellite channels, pressing the back rewind button EVER SO SLIGHTLY, jumps way back to the beginning of when I tuned to that channel; it's as if I held it down using SUPER THUMB. It happened with another remote, so I paired a newer remote that wasn't used as much = same result.

Is this a software thing? Or is my thumb that powerfully strong?

thank you

See I told you it wasn't your thumb. Next time try a 🛠.

 

[NABRIL]

Hi
Apparently, my thumb remains strong despite fatigue from the Olympic games.

Has the software issue been resolved? Or do we have to continue to rewatch everything after one subtle press of the rewind button??

 

[cpdretired]

As of today no.

 

[TheKrell]

As of today no.

Really? I haven't noticed that problem in months.

 

[cpdretired]

Did it yesterday on a OTA channel. One press back went 30 minutes. This only happens on my OTA channels. Sat channels work fine. I guess I should have been clear on what channels are affected.

 

[Nebugeater]

Did you accidentally activate the "DeLorean" function?

 

[MikeD-C05]

Did you accidentally activate the "DeLorean" function?

Didn't know the hopper had the "flux capacitor" installed.

 

[EENAU]

I have this same problem on MLB Extra Innings while the game is still recording. Skipping forward or back usually goes to the very beginning or end of the recording. FF is hit and miss in behaving normally. Behavior seems somewhat better when watching a recorded game after all recording has ended. Fortunately, MLB.TV streaming ability is included in EI, so that allows one to perform the lost functions, when necessary. I tried corresponding with a Dish tech for a while, but didn't get anything useful other than they would refer it to someone higher up.

 

[ekilgus]

This issue seems kind of random. It seems to work correctly on some channels and not on others. And when it doesn't work correctly, the results are inconsistent. Anyway, Dish tech said they're aware of it, and I've been getting around this by using the back button and not the one that's supposed to back up 10 seconds.