I noticed today that I am able to receive the RT channel on SES 6 when the dielectric plate is placed in one of the two possible slots on my ESX241 LNB. If I move the dielectric plate to the opposite slot I am no longer able to receive the RT channel,however, I am able to receive a different set of channels. Can anyone please explain this? Is there a way I can receive all channels?
Positioning of dielectric plate within C Band Lnb for SES 6
- Thread starter cebu22
- Start date
- Latest activity Latest activity:
- Replies 4
- Views 9K
- Status
Your 'different set of channels', are they the ones on the opposite polarity?
http://www.global-cm.net/MPEGlistATL E.pdf
R(ight)= Vertical, L(eft)= Horizontal. Remembering rule: RV
http://www.global-cm.net/MPEGlistATL E.pdf
select the other polarity with the receiver.
R(ight)= Vertical, L(eft)= Horizontal. Remembering rule: RV
Circular transmission comes in RIGHT-hand, and LEFT-hand varieties, and that seems to be what you are experiencing. So, that would explain why you are getting different sets depending on how the plate is installed if you don't change your polarity on your receiver.
So, If I am receiving channels from both polarities H & V means that my dielectric plate is placed correct and I dont need to move anything on my receiver?.. right?
I am using Geosat pro C2 LNBF with the dielectric plate inserted in the center slot..(I do not remember seeing two slots)..
Using Openbox HDS9
pd
for hang up
I am using Geosat pro C2 LNBF with the dielectric plate inserted in the center slot..(I do not remember seeing two slots)..
Using Openbox HDS9
pd
for hang upThe right position is that in which the plate seems to be in the middle of the tips of the two elements (L&R) That will give you the R channels as right (V) and the left as left (H)
- Status
