Pico Macom pcm55saw modulator

[truckracer]

I bought some of these used. I have 3 up and running. My question is, one of them says it is set for "channel B". What is channel B? What band or frequency is that? Where could I find the information on how to change the jumpers in the unit to change the output channel? I googled and could not find any specific manuals that show how.

Sent from my SM-G930T using the SatelliteGuys app!

 

[FTA4PA]

I bought some of these used. I have 3 up and running. My question is, one of them says it is set for "channel B". What is channel B? What band or frequency is that? Where could I find the information on how to change the jumpers in the unit to change the output channel? I googled and could not find any specific manuals that show how.

Sent from my SM-G930T using the SatelliteGuys app!

Here is the installation and operation manual for it. It mentions DIP switch controls but I do not see detailed info about using them.

https://www.tonercable.com/pdf/PCM55_SAW_Product_Manual.pdf

 

[truckracer]

Here is the installation and operation manual for it. It mentions DIP switch controls but I do not see detailed info about using them.

https://www.tonercable.com/pdf/PCM55_SAW_Product_Manual.pdf

That was my issue. I didn't see how to use them. Guess I could take a pic of them the way they are. Then experiment moving them doing tv channel scans.

Sent from my SM-G955U using the SatelliteGuys app!

 

[pacificrim]

Channel B is channel 15 on analog cable

 

[truckracer]

Channel B is channel 15 on analog cable

Did a scan and found it. I removed one jumper and it modulated to channel 98 cable

Sent from my SM-G930T using the SatelliteGuys app!