Partial Signal Loss but only on local channels
- Thread starter Tecmo SB Guy
- Start date
- Latest activity Latest activity:
- Replies 26
- Views 11K
Satellites are not in perfect position. They do course corrections on a regular basis. Observing from the ground the satellites wobble up and down in their orbit over a 24 hour period, and move east west usually on a weekly pattern. If your alignment is off the satellite can cycle off and on during the day as it just moves out of position enough for you to lose signal.
I had this problem & thought it was the lnb...........it was changed, cable was changed.........wound up being the receiver
Yeah I did Menu 6-1-3 and then pressed on "Details" and saw this:
Are all those signal losses? Because I noticed the code 11-12-11 is something I've seen everytime I get a full or partial signal loss.
Are all those signal losses? Because I noticed the code 11-12-11 is something I've seen everytime I get a full or partial signal loss.
is 110 the only one fluctuating?
if it fluctuates to 70, it sounds more like a line of sight issue
if it fluctuates to 70, it sounds more like a line of sight issue
Yeah it's only the 110.
Are line of sight issues and alignment issues the same thing?
Alignment is the orientation if the dish. Line of site is related to objects obstructing the signal from reaching the dish. The most common obstruction is foliage such as that from trees. As the limbs blow around in the wind the signal can be obstructed.
Sent from my iPhone 4S using Forum Runner
Similar threads
