Pansat 2700 & Motorized

[taelon721]

Ok. Getting ready to do my first motorized dish this weekend.
Equipment:
Pansat 2700A
GeosatPro 90cm Dish
GeosatPro GS120 motor (basically SG2100)(Diseqc 1.2 & USALS)(140degree limit)
Invacom QPH-031 LNB
DiseqC 4x1 switch if need be

Satellite range available for my location (according to SatAntAlign 2.36.5):
18.0W Elev. 1.040degrees to 148.0W Elev. 21.633degrees
Location: Tulsa, OK

From what I remember from the forums, QPH-031 is a Standard LNB.

I guess the 2700 does not have the "Goto X" function. So, should I use the USALS with this equipment?

What other things should I know about before I do this install? This is my first time to do an FTA dish, especially a motorized. Any tips would be helpful.

Thanks....

 

[PSB]

Leave the switch out when setting up, once you are all lined up you can add that!

Use only one Liner output from the QPH-031 to start with (L.O. 10750).

Have fun!

 

[taelon721]

Leave the switch out when setting up, once you are all lined up you can add that!

Use only one Liner output from the QPH-031 to start with (L.O. 10750).

Have fun!

Ok. Thanks! Once I get this up and running, and then get the 10ft C-band up and running, I am going to have to throw a party, and show my friends how much fun FTA can really be.

I guess the best way would be to pick a day that a game is going to be on a feed!

 

[PSB]

With a 10' dish you can watch The Tube! Instant party! 24/7

http://www.lyngsat.com/amc3.html