Pansat 2500A with motor dish

[Tommyboy]

Does anyone have some pictures of a dishes that move with a pansat2500a?
And how much do that cost? This way i don`t have to move my c/ku band dish first.

 

[PSB]

It costs around $200 (Shipped)for a 75cm/30" dish, motor, and standard KU LNBF, check the below links for some ideas, pictures and specs, but as always shop around.......

http://www.dmsiusa.com/products.htm

 

[SatelliteAV]

There are some photos in our SG2100 installation guide that will give you an idea of how everything works and is mounted.

http://www.adventistsat.com/downloads/InstallDiSEqC.pdf

 

[TuxCoder]

Or look at PSB's avatar.
I like it, Pete!

 

[PSB]

Thanks Tux, I have been sniffing this one out for SOMETIME then found it in a European "satellite" search, I should have checked there first as they invented the Stab motor. I will just have to remember to give it a squirt with WD40 now and again as its starting to squeak : )

 

[TuxCoder]

Yep definitely keep that thing in top shape, it sure moves a lot faster than my motor. I guess my weekend project now is to soup up my SG2100 to go that fast or even faster. I'll have to be careful though that when I motor over to SBS-6 it doesn't fling my LNBs through my neighbor's window.

 

[tdti1]

Does anyone have some pictures of a dishes that move with a pansat2500a?
And how much do that cost? This way i don`t have to move my c/ku band dish first.

If you have a c/ku setup I find it best to get alll the fta channels. A 76 cm or 90 cm dish is good for ku though.