New X4 satellite mapped wrong
- Thread starter tvropro
- Start date
- Latest activity Latest activity:
- Replies 37
- Views 7K
- Status
It has to be or your receiver is toast. See picture attached. Options 6.0.5 > arrow to diagnostics G.
Attachments
Receiver operation is nominal. All X4 Channels loaded but no Guide for X4. Guide is normal otherwise. DMX reception on 900 channels. Regarding TDT and your instructions this is correct of course. Area that should be TDT is blanked with ffff.
I am second owner on this rec. and it always is like that. Previous owner was supposed to be in communications development. If any changes were made receiver shows absolutely no sign of intrusion. As of today antenna will be aimed at no satellite.
weird.
Been reading allot all around on 4DTV. I have a 922 that I have been experimenting with and all I can get to come in is
CSPAN on G1/7 I have tried other sats, and can't seem to get anything to come in. Now in the Diagnostic area that you have illustrated
the line that has receiver number says "Not in support mode" ,the line just below and on down read,
0000EC 0000EC 0000EC 0000EC 000000
0012001B00000000 FED4 1 1000 141
0000 On 3AA72DC1 3A0110FD Random numbers and letters
508 0 0 17220 4131 :00-00
0000 0001 1FFF 1FFF 1FFF 0FFE
3973 2388 0 0 0 534
Now I have tried calling both broadcast services for a rehit, or activation
and they both say they won't with out a subscription. I told them that
until I could realize that it would work for me I wasn't inclined to subscribe.
I wasn't going to pay for something until I new it was going to work for me.
So, am I at a delema and won't receive any of the other stuff that is FTA
until I get activated, or should I be receiving all FTA channels now??
CSPAN on G1/7 I have tried other sats, and can't seem to get anything to come in. Now in the Diagnostic area that you have illustrated
the line that has receiver number says "Not in support mode" ,the line just below and on down read,
0000EC 0000EC 0000EC 0000EC 000000
0012001B00000000 FED4 1 1000 141
0000 On 3AA72DC1 3A0110FD Random numbers and letters
508 0 0 17220 4131 :00-00
0000 0001 1FFF 1FFF 1FFF 0FFE
3973 2388 0 0 0 534
Now I have tried calling both broadcast services for a rehit, or activation
and they both say they won't with out a subscription. I told them that
until I could realize that it would work for me I wasn't inclined to subscribe.
I wasn't going to pay for something until I new it was going to work for me.
So, am I at a delema and won't receive any of the other stuff that is FTA
until I get activated, or should I be receiving all FTA channels now??
This has happened several times already. I map X4 in , (just after) It's Tile sits immediately left of w5, again today, I notice the tile moved to the #3 position left of w5. I go back to w5/600 (sit for a few minutes) , check the sat tiles and it's moved back to, 1 left of w5.
hmmmm (haven't been on G1) only w3 & w5 this morn. Unit is set NOT to move on it's own and was not turned off last night. (hardly ever gets turned off). This is not the first time the x4 tile has moved.
Anybody know why and if it a concern.
hmmmm (haven't been on G1) only w3 & w5 this morn. Unit is set NOT to move on it's own and was not turned off last night. (hardly ever gets turned off). This is not the first time the x4 tile has moved.
Anybody know why and if it a concern.
This happens to us as well. I could be wrong but I think it happens to most everyone. Maybe someone else can chime in
Normally I'd say two sets of maps but other weird things are going on now. See my last post on the kill Hit http://www.satelliteguys.us/4dtv-discussion/237295-kill-hit-5.html
Think we all got screwed ahead of time
Think we all got screwed ahead of time
If I go to X4 either position my map is the same. I have the 100 -8xx list. Wondering if the 200-9xx is better. Hist W and HGTV W is not in my 100-9xx list.
For some reason I keep getting the 100-8xx map, even after reset. Not planning any more soft resets at this time. If my W5 map stays, I'll probably prefer using it (if I can) as I'm familiar with its numbers. Also made a list of the W5 generics if thats a way to keep getting W feeds of Hist & HGTV.
Last edited:
QUOTE=dhj;2419709]For some reason I keep getting the 100-8xx map, even after reset. Not planning any more soft resets at this time. If my W5 map stays, I'll probably prefer using it (if I can) as I'm familiar with its numbers. Also made a list of the W5 generics if thats a way to keep getting W feeds of Hist & HGTV.[/QUOTE]
You might check this and it's only a wild guess on my part as to your problem. If you haven't already.
Press options,6, 0 which will give you a screen with 5 options, select 5 and go to screen G by using the left arrow key. Top line and the 5th set of numbers should be lower than 1950 if not then you'll need to do a master reset. I checked all my 920's and there at 1714 count.
But big problem if you would have to do a reset at this time I'm not sure if G1 is still available, you would need to check on this.
You might check this and it's only a wild guess on my part as to your problem. If you haven't already.
Press options,6, 0 which will give you a screen with 5 options, select 5 and go to screen G by using the left arrow key. Top line and the 5th set of numbers should be lower than 1950 if not then you'll need to do a master reset. I checked all my 920's and there at 1714 count.
But big problem if you would have to do a reset at this time I'm not sure if G1 is still available, you would need to check on this.
Last edited:
Thanks but don't think the count is an issue with my 905.
BTW guide is still there, I updated today.
Still watching my subs and using the guide. No boogieman sighted around here yet, unless you count NPS.
BTW guide is still there, I updated today.
Still watching my subs and using the guide. No boogieman sighted around here yet, unless you count NPS.
I have two 905's. One won't do the 200- channel map and the other did fine. Both units have good Id numbers and were previously subb'd.
Tried that but keep getting the same map! Maybe after 1/4 it will work or I'll find a way around. Thanks anyhow & Happy New Year.
- Status
