I have a Sony 2 LNB dish that came with the house. Recently someone gave me a Hauppauge WinTV-Nova DVB card. I have connected one of the lines from the dish to the card. I then aimed the dish at what I believe to be AMC-6 @ 72W. I am at location:
Latitude: 33.0006°
Longitude: -96.9027°
If that matters. Using the in-line signal strength meter, I fine tuned the dish, and am getting a very strong signal.
I then scanned for channels using the hauppauge software, and it found nothing.
So I used ProgDVB, and it didn't find any channels, but it says I have 100% signal and 0% quality.
I am sure I am doing something wrong, or am missing some equipment, or don't have things set up properly.
Any assistance you can give me would be greatly appreciated.
Latitude: 33.0006°
Longitude: -96.9027°
If that matters. Using the in-line signal strength meter, I fine tuned the dish, and am getting a very strong signal.
I then scanned for channels using the hauppauge software, and it found nothing.
So I used ProgDVB, and it didn't find any channels, but it says I have 100% signal and 0% quality.
I am sure I am doing something wrong, or am missing some equipment, or don't have things set up properly.
Any assistance you can give me would be greatly appreciated.