AMIKO New Firmware Released for the Nano, Nice update!!

[neljtorres]

Firmware version 1.6.09 is for the HD 8240 or the Mini HD, not a Nano HD. What receiver do you Have?

I got the HD 8240, It upgraded the software but not the loader, When I installed it using all software plus loader, but when I want to install the 1.176 still gives me the message that there is a loader mismatch

 

[mmewrench]

The 1.176 file will not work in the HD8240. It is meant for a different receiver with a different processor. You already have the latest file in your HD 8240.

 

[KE4EST]

neljtorres, this thread is for the Amiko Nano HD. The receiver you have is not the same thing.

 

[KC9TIK]

Anyone try the WebTV?

I have. My internet connection speed doesn't support it too well, but it works.

http://www.namini.tk/n.abs

That's works. Ready for the next update.

 

[neljtorres]

The 1.176 file will not work in the HD8240. It is meant for a different receiver with a different processor. You already have the latest file in your HD 8240.

Okay Thanks my mistake!

 

[neljtorres]

neljtorres, this thread is for the Amiko Nano HD. The receiver you have is not the same thing.

Ok Thanks My mistake

 

[KE4EST]

Ok Thanks My mistake

No problem.

 

[Chewie]

Hello All
I try to upgrade per the instructions here and it did not work, so I have a dead duck now, any alternatives.
Please let me know
Tunder

 

[KE4EST]

When you did the upgrade, did you go to the upgrade mode setting and change it to All SW + bootloader?

Does your receiver still boot up and can you still get into the menus?

 

[Chewie]

When you did the upgrade, did you go to the upgrade mode setting and change it to All SW + bootloader?

Does your receiver still boot up and can you still get into the menus?

Hello Ke4est
Yes I selected All SW + bootloader and it uploaded and reboot it, I can still get to the menus, I think the problem is that Is not restoring the back-up settings, After the upgrade re-boot I selected the back-up file and it send it and re-boot it but still missing all the Sats, when I select the installations in the sat window it show no data and some error.
I post the information at amiko forums also.
I am just wondering if a sat list can be uploaded.
Let me know.
Tunder