Need New Mesh for a Unimesh 10'

[KJ6EO]

Hello and thanks for reading my post. I have a friend who has a damaged Unimesh 10' bud. Some of the mesh is damaged. Is it possible to buy new mesh so that we could repair the dish? If so, who manufactures it, and where could I get it. Thank you in advance for your time and consideration.

 

[Titanium]

This subject has been discussed many times on the forum. Here is one from a few years ago.

Paraclipse 10 mesh

I might be able to get a Paraclipse 10 that is treed in and still in decent shape. I think the mesh is too big for Ku so I'd want to change it out. Is there a practical alternative that can be used? Aluminum window screen? Anything else that comes in a roll and ships?

www.satelliteguys.us

 

[mr3p]

Tek2000 used to sell it although I just looked and its out of stock. IIRC dish mesh is considered an expanded metal so you may need to make some phone calls.

KTI polar mount

This bolt, most likely has no thread in the middle, so when pole is touching it the thread will not be broken. It is normal when bolt sits on the top of the pole, t works as mechanical stop for the mount to not slide down too much.

www.satelliteguys.us

 

[Comptech]

I saved the mesh from a 12 foot paraclipse that the frame was damage beyond repair.But looking at your coordinates you are way to far away to pick them up.

 

[James leandre]

I saved the mesh from a 12 foot paraclipse that the frame was damage beyond repair.But looking at your coordinates you are way to far away to pick them up.

SUBSTITUE IT WITH MESH FORM YOU LOCAL HARDWARE STORE. THAT'S WHAT I DID.

 

[mr3p]

SUBSTITUE IT WITH MESH FORM YOU LOCAL HARDWARE STORE. THAT'S WHAT I DID.

Got a picture of the hardware store mesh you used? Amazon also sells metal mesh that would probably work.