My sat setup (grounding & Lnb questions)

Status
Please reply by conversation.

scottc98

SatelliteGuys Pro
Original poster
Feb 28, 2006
1,342
0
Columbus, OH
Hey everyone,

I've had an existing FTA for many years now and have finally got around to laying it out on paper. After reviewing it, I was starting to wonder if I have everything properly set up grounding-wise. The system has not caused me any issues expect for one failed Disqec, a bad BSC621, and the occasional realignment due to weather. Hoping people here can take a look and maybe suggest a few things that I missed on the installation.

Here are my main questions:

1) Is my grounding correct or am I missing some pts (i.e switches)

2) Thinking of switching the two KU standard LNBS with Dish stacked lnbs to open a few ports up. Where would you put the two extra LNBS at? (Can only be between 72 and 112 on the T90)

3) Now that IS-9 KU is pretty much dead now, any ideas on what to do with this dish? (View is only between 50ish to 82/83 at its current location)


Thanks in advance :)
 

Attachments

  • ScottC98_Sat_setup.jpg
    ScottC98_Sat_setup.jpg
    77.6 KB · Views: 218
Scott, your grounding looks correct - the ground block should be within 10 feet of the entrance to the house.:)
Bob
 
Status
Please reply by conversation.

Captive Works signal meter

problem with switching &/or CS4000

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)