Made the move back to PR. No Mortgage, low taxes and the laid back life. I contacted Dish mover, no problems. I had planned to simply make some minor lnbf mods to my existing 6 and 5 foot antennas (1.8m, 1.5m). Some Nummy (old tenants I guess) had tried to change the LNBF on my 6 footer by putting a ladder on the lnbf support brace and bent it, my 1.5 was inverted and the is an extra Direct tv antenna on my house with a Dish LNBF (suppose because they screwed up the six footer and couldn't get signal. When the Dish tech shows up for install I declined the PR Dual antenna. I had re-inverted the 5 footer, repaired the bent lnbf brace on the six footer and turned the Direct TV antenna into a bird bath. I "popped the Case off my old Legacy LNBF and put it on the DP the Tech brought, that way I was able to use the original split bushing for proper angle and location on my 6 footer. That works great Lowest Xponder on 119 is 95,may others pegged. Dish tech opened up the mount on the 5 footer with 2 small cuts with a hack saw and mounted the LNBF with a couple zip ties. Worked great good signal. Tech did drill a hole in a copper water line that was in a cement wall though. I didn't bust his balls and made all the repairs while he was here. Good Guy, reminded me of when I was here doing installs, but everything was the 1.8m and some 1.2m then.