Motor Install Thread
- Thread starter Nov-01
- Start date
- Latest activity Latest activity:
- Replies 17
- Views 2K
- Status
Cale, give this a read: http://www.satelliteguys.us/xen/threads/how-to-install-a-usals-motor-condensed-version.360671/
If you cant figure it out let me know and Ill make a video for you.
KE4EST write up is pretty spot on. It is what I used.
Thanks Guys!
I had Michael's PDF printed, and it's the guide I've been studying and used yesterday. My Lat is 81, so I'm guessing this is the closest to me: Arsat 2 at 81.0°W?
according to LyngSat...so where do I find the transponder info?
this is my LNB (from KE4EST) SL2PLL LNBF by GEOSATpro "World's First PLL Standard Dual LNBF" *PLL LNB*
looked up history on ebay (didn't realize I bought my Amiko box from you too!) time flies...
anyways, I've been called off the project for the rest of the day today-maybe back later this evening to continue to tackle.
thanks again!
I had Michael's PDF printed, and it's the guide I've been studying and used yesterday. My Lat is 81, so I'm guessing this is the closest to me: Arsat 2 at 81.0°W?
according to LyngSat...so where do I find the transponder info?
this is my LNB (from KE4EST) SL2PLL LNBF by GEOSATpro "World's First PLL Standard Dual LNBF" *PLL LNB*
looked up history on ebay (didn't realize I bought my Amiko box from you too!) time flies...
anyways, I've been called off the project for the rest of the day today-maybe back later this evening to continue to tackle.
thanks again!
You mean Longitude 81w?
You Latitude is lower 30's if your in SC.
http://www.dishpointer.com/
then look on
https://www.satbeams.com
to make sure you can find something.
Not super sure but I would look at 83w AMC9.
Elevation should be set at 50.6, depending on what part of the state.
Pics of your setup would help.
Take care
You Latitude is lower 30's if your in SC.
http://www.dishpointer.com/
then look on
https://www.satbeams.com
to make sure you can find something.
Not super sure but I would look at 83w AMC9.
Elevation should be set at 50.6, depending on what part of the state.
Pics of your setup would help.
Take care
Thx for the correction. Dyslexia 
Still no dice , no signal rec'd at all, dish move as it should, lay/long entered at USALS screen. Guessing there is a missing piece somewhere that is causing the issue
Not finding the spot with the Mini HD to enter transponder or Horizontal/Vertical or known symbol rate?
Still plugging/sweating away
Thx
Still no dice , no signal rec'd at all, dish move as it should, lay/long entered at USALS screen. Guessing there is a missing piece somewhere that is causing the issue
Not finding the spot with the Mini HD to enter transponder or Horizontal/Vertical or known symbol rate?
Still plugging/sweating away
Thx
Double check that your pole is perfectly plumb, motor is set for correct latitude and lnb is skewed to zero (motor will take care of skew for you). I'm not in front of my Amiko Mini HD SE but I believe the transponder settings are accessed under Satellite Installation. Select the sat you want and USALS should move the dish. The transponders are listed under TP Index. You can select a known good one or press the Yellow button to add or edit them. Once the dish has moved to the sat and you are using a known good transponder you should be able to tweak your dish and get a Q reading then do a scan.Thx for the correction. Dyslexia
Still no dice , no signal rec'd at all, dish move as it should, lay/long entered at USALS screen. Guessing there is a missing piece somewhere that is causing the issue
Not finding the spot with the Mini HD to enter transponder or Horizontal/Vertical or known symbol rate?
Still plugging/sweating away
Thx
This gives me nasty flashbacks...
I must have tried about a half a dozen times to get a motorized system to work and ended up in this exact situation. Let us know if you succeed!
The problem with this type of meter is you won't know which sat you'r looking at. However if you do know the sat you are on, its great to tweak the dish for max Q.
- Status
Similar threads
