Low signal quality problem

[jself1982]

Turned the BUD to G4, connected the Fortec Mercury II, and you would think it being a 10' mesh that I would pull some powerful #'s, couldn't get anything about 40%....why? what's wrong? I tried skewing and tweaking the dish, nothing more than 40%, the blind scan won't pick up much, + the aggrevaition of having to switch polarities while doing a scan. Plus lyngsat hasn't been much help!

 

[voomvoom]

I just took a look for you and I get 44% on KCWY, which seems to be my lowest, 90% on the GDMX feeds, most of which are 4:2:2, and 73% on the networks. This is on C-band. On the ku side, I don't know of any 24/7 feeds for DVB, but there are plenty of DCII feeds. I'm using a 10' mesh in mid-Georgia.

Al

 

[Das Hammer]

Do you have this issue on other sats or just G4 (G16).

 

[jself1982]

On most all of them, but I get a non pixelated picture however, just low signal, there is a few that are pixelated, but just a few.

Even on my C4 C-Band QVC/HSN is horrible too.