Ku LNBF - receiving signal

Status
Please reply by conversation.

i4tas

SatelliteGuys Pro
Original poster
Sep 10, 2005
791
4
Northern USA
I am using a 0.3dB Universal Ku Single LNBF on my 7.5 c-band satellite dish. I was able to receive only a few channels on G-10R and could only find signal on that sat.
I found "PiTV" 11718, 26800 [V] PAC1 was the only unencrypted channel, 15 encrypted.
I also found channels on "EJN" 11819 [H] 21000 4 encysted (Channel #1, Channel #2...)
I found 3 other transponders all with no channels
Signal was around 50-60%
I am in the Midwest, 87 is true south.

I was never able to find echostar 9 (121) which should have strong signal.

Here is a pic on my lnb, does anyone know where the vertical and horizontal lines are? are they parell with the sides of the lnb plastic casing?
 
Last edited:
Its all about the focal point from your dish to the LNB, your type of univeral LNBF is not capable to use on the C band dish. Even use on the regular 1 meter dish, if the focal pont is too far or too close to the dish, you do has the same problem.
 
sksatellite said:
Its all about the focal point from your dish to the LNB, your type of univeral LNBF is not capable to use on the C band dish. Even use on the regular 1 meter dish, if the focal pont is too far or too close to the dish, you do has the same problem.

Makes sense, but why do i still receive some signal?
 
Status
Please reply by conversation.

Anyone anxious to see SuitSat launched?

Motor positioner signals.