Can someone explain how to use the Ka-hi and Ka-low readings on the Acutrac III pro, or, more importantly how to use the meter to properly align my Slimline?
Acutrac III's instructions provided are silent on how to use it to align a dish. The Slimline's instructions don't refer to the Accutrac.
I peaked the Ku of the 101 West (13v 0khz) and then the Ku of the 119 W (13v 22khz). When I come down & check my HR20. the setup screen displays a matrix of 12 odd and even satellites. It shows failure (an "X" mark ) on 103 odd and 103 even and a blank (neither "X" nor check mark on the 110 odd. All other 7 spaces are check marks.
Don't know what else to do!
Acutrac III's instructions provided are silent on how to use it to align a dish. The Slimline's instructions don't refer to the Accutrac.
I peaked the Ku of the 101 West (13v 0khz) and then the Ku of the 119 W (13v 22khz). When I come down & check my HR20. the setup screen displays a matrix of 12 odd and even satellites. It shows failure (an "X" mark ) on 103 odd and 103 even and a blank (neither "X" nor check mark on the 110 odd. All other 7 spaces are check marks.
Don't know what else to do!