Install dish into concrete pad

Status
Please reply by conversation.

ryanogorman

SatelliteGuys Family
Original poster
Jun 7, 2013
38
12
Phoenix, AZ
Has anybody had DirecTV install a dish into a concrete pad? The pad is 2ft by 2ft on the side of my house. I am just trying to keep the dish off my house. Yes there is a great line of sight to the satellites.

Is this part of the “standard install”?

Thanks in advance for your responses.
 
Its not standard stuff ....

There are set ups that are flat that would sit ON the pad, same as the roof or patio mounts, but I don't know if guys carry them on thier trucks.

There are set ups designed to place cinder blocks on the mount as well (patio version).
 
  • Like
Reactions: JSheridan
Made using 16 gauge steel and such a small base, I don't think that post would be a good choice for a Slimline setup.
I've installed them many times and they are pretty strong. I wouldn't put the dish at the top though.
 
Installing antenna on a concrete pad is a very good idea. I, personally, like it very much. There is one I made year ago. There are more than 600 kilos of concrete in the ground. Fixed the metal to the concrete by anchor-bolts. It is also possible to adjust verticality of the pole.
 

Attachments

  • IMG_20160626_152533 (Large).jpg
    IMG_20160626_152533 (Large).jpg
    88.1 KB · Views: 336
  • IMG_20160626_160228 (Large).jpg
    IMG_20160626_160228 (Large).jpg
    73.3 KB · Views: 320
  • IMG_20160626_174003 (Large).jpg
    IMG_20160626_174003 (Large).jpg
    58.1 KB · Views: 334
  • IMG_20160729_114100 (Large).jpg
    IMG_20160729_114100 (Large).jpg
    62.8 KB · Views: 342
  • IMG_20160730_151652 (Large).jpg
    IMG_20160730_151652 (Large).jpg
    48.4 KB · Views: 387
Claude that’s what I was thinking of trying with anchor bolts drilled right into the cement
I didn't consider it at first since it seemed the dish would be so low, an issue in the winter. Then I looked at your location!
 
Status
Please reply by conversation.

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)

Top