I got my RTV Finally

[ken2400]

First I using a P* dish and all all was fine.
Then around feb they went to 87W C band.

First I tried the 8' and that not enought
So I found a 10' and that did not cut it. So that was pointed to 125W to get antenna TV for a local low power station i am helping out.
Now it was time to point the 12' solid. That got it.

 

[primestar31]

Huh? You can get AntennaTv in the clear off of 125W?

 

[KE4EST]

Took at 12 foot huh. Glad to hear you got it!

 

[KE4EST]

I am guessing the low power TV station has the rights and the receiver to decode it.

 

[. Raine]

All I've ever been able to pick up off of 125W C Band is TBN and stuff like that, never saw Ant Tv. Not ITC.

 

[ken2400]

Ya we have the rights and the receiver from Antenna TV.
The dish without the LNB is the 8'
I was using the c band Titanium PLL LNB on both the 8' and 10' to tune in 87W BUT it did not work. Is working fine on the 10' to get 125 W

 

[ken2400]

An update. I am now able to get RTV using a 7.5' dish and it appears to be stable. They must of uped there signal.

 

[DJdish]

Now, it´s also on Ku.

 

[Corrado]

I have a 6' dish pointed at 87W since last summer and the Luken channels come in perfectly. I read that work was done on the uplink hardware to improve the signal and was apparently a success. Previously I had to run my 10' dish over to 87W.