I switched back yesterday to the NR. Just do a reset and the 02468 trick and you get whatever is in the stream normally for your box.
HR20-HR24 / H21-H25 CE Release 12/2
- Thread starter jcrandall
- Start date
- Latest activity Latest activity:
- Replies 79
- Views 12K
Thanks. I did find out one interesting thing - my HR24-200 in the living room doesn't have the same 30 second pause as the other three units. Go figure. I love the HD gui so I'll put up with it for a while until one of the newer upcoming streams fixes it.
Sorry I meant that it doesn't take about 30 seconds for the power to come on like the other 3 boxes.
dogbite said:
What's your power on issue? Two of my H24 take up to 30 seconds to power on. When I went back to the NR it fixed the problem. When I Redownloaded the CE the problem came back.
Sent from my iPhone using SatelliteGuys
andrewj0781 said:
Andrew, curious, is the Power Saver ON or Off, turn it off and see what happens, might have to reboot after to see a difference.
Sent from my Samsung Epic using SatelliteGuys
Jimbo said:
That doesn't help. The only fix I found was going back to NR. Thanks for the idea.
Sent from my iPhone using SatelliteGuys
This is why it's Beta software so people can help out ....
See if next weeks CE fixes it.
I have noticed a problem with the screensaver in the latest CE (0x58d on HR21-700). After a reboot, if you pause live tv, a screen saver with a small DirecTV logo bouncing around will appear after 5 minutes. This is normal.
After switching to a SonicTap channel, the screen saver also appears after 5 minutes, but instead of the logo there is a box with the current song info bouncing around. This is also normal.
If you now switch back to a normal channel and press pause again, after the five minute time-out the screen saver appears but now shows the box with song info from the previous SonicTap channel.
Report sent: 20111207-2ED4
After switching to a SonicTap channel, the screen saver also appears after 5 minutes, but instead of the logo there is a box with the current song info bouncing around. This is also normal.
If you now switch back to a normal channel and press pause again, after the five minute time-out the screen saver appears but now shows the box with song info from the previous SonicTap channel.
Report sent: 20111207-2ED4
Jimbo said:
I don't want to be called a trader but I did sign up at DBS talk and reported it there also to make sure D* sees it.
Sent from my iPhone using SatelliteGuys
Anyone notice that "previous channel" within the guide doesn't seem to work anymore (or at least on my HR23-700)?
First time CE downloader, so forgive my ignorance if this was expected.
- james
First time CE downloader, so forgive my ignorance if this was expected.
- james
Looks like at the moment when in the Guide, if you use the FF and REV buttons it advances the guide, instead of the picture.
Hopefully that gets fixed next week.
A lot of buttons got new assignment in the last CE.
Then that new remote RC70X for RVU shows up. And it's missing a few buttons.
Someone said that remote is only for RVU Clients, but then why are buttons on the old remote getting reassign?
Then that new remote RC70X for RVU shows up. And it's missing a few buttons.
Someone said that remote is only for RVU Clients, but then why are buttons on the old remote getting reassign?
Attachments
Last edited:
Past 2 days the HR20-100 has been mostly unresponsive to remote control. The batteries are brand new, controls the TV just fine... If I keep holding or pressing buttons, sometimes it responds, occasionally acts normal and then nothing for a couple minutes. Turning off and on from the front panel sometimes makes it act normal for a few minutes. Didn't try a full reset, figured another CE will be here soon enough for that 
