How to read the values in the 6-1-3 details report?

[SatelliteMike]

What are the values in the 6-1-3 details report representing? I am looking for an index I can print out for our techs to use when troubleshooting, and the more info the better. THANX!

 

[papalittle]

These apply to dual tuners and all VIP receivers(including 211 & 211k)

Value:0 Above 2:Hard drive is failing
Value:1 Above 10 Hardware failure-driver
Value:2 Above 0 Receiver is having potential hardware issues
Value:3
Value:4 Above 200 receiver is locking up(does not apply to 322)
Value:5
Value:6
Value:7 4-is the only acceptable value (on 522dvrs ONLY) any other # har drive is malfunctioning
Value:8
Value:9

Values 3,5,6,8,&9 are for engineering use only

 

[RandallA]

Check this thread, I posted a PDF file a while ago.

http://www.satelliteguys.us/dish-network-technical-discussions/154118-stb-health-lite.html

 

[mrc54]

I have a vip 622, my value 7 is -2. What does that mean ?

 

[Voyager6]

I have a vip 622, my value 7 is -2. What does that mean ?

Value #7 applies only to the 522.

 

[dishnet_tech]

These apply to dual tuners and all VIP receivers(including 211 & 211k)

Value:0 Above 2:Hard drive is failing
Value:1 Above 10 Hardware failure-driver
Value:2 Above 0 Receiver is having potential hardware issues
Value:3
Value:4 Above 200 receiver is locking up(does not apply to 322)
Value:5
Value:6
Value:7 4-is the only acceptable value (on 522dvrs ONLY) any other # har drive is malfunctioning
Value:8
Value:9

Values 3,5,6,8,&9 are for engineering use only

This information was distributed to techs in our office more than a year ago. Personally, I have found little use for it. Most of the time I have never seen these values vary from receiver to receiver, and when they have indicated a failure of some sort, the cust has not seen or experienced any issues. And, I'd bet that if a tech were to RA an otherwise working receiver, it'd come back against them as a NPF (no problem found).