Here is my situation:
Dish was installed a few years ago, when they installed it, the receiver was put in my kid's room, which was ok at the time, no HD tv's in the house. Now that I have an HD in the living room I want to send the HD signal for TV1 to the living room and send the TV2 signal to the TV in my son's room.
The receiver is a Dish 522, I only see 3 outputs on the back, 2 coax outs and an svideo out. This leads me to assume that I can use coax for an HD signal, since the book says the box can do 1080p.
My Issues:
Can it really be as simple as switching the tv1 and TV2 outputs on the back of the receiver?
And, if it is, since TV2 is controlled by the UHF remote, and tv1 is controlled by the IR remote, can that be reversed?
Or do I have to pay Dish to come in and move the box and re-run the cabling?
I did some searching and the more I searched, the more lost I got.
Thanks in advance
Dish was installed a few years ago, when they installed it, the receiver was put in my kid's room, which was ok at the time, no HD tv's in the house. Now that I have an HD in the living room I want to send the HD signal for TV1 to the living room and send the TV2 signal to the TV in my son's room.
The receiver is a Dish 522, I only see 3 outputs on the back, 2 coax outs and an svideo out. This leads me to assume that I can use coax for an HD signal, since the book says the box can do 1080p.
My Issues:
Can it really be as simple as switching the tv1 and TV2 outputs on the back of the receiver?
And, if it is, since TV2 is controlled by the UHF remote, and tv1 is controlled by the IR remote, can that be reversed?
Or do I have to pay Dish to come in and move the box and re-run the cabling?
I did some searching and the more I searched, the more lost I got.
Thanks in advance