How does 622 decide which satilite's signal to display?

[RBODYMAN]

I have a 622 & 211 installed recently. I have 3 dishes that see 61.5, 110, 119 & 129. How does 622 decide which satellite signal to diplay when voom, espn2hd and universal hd are on 61.5 and 129? Signal strength on 61.5 is much higher than 129.

richard

 

[teachsac]

I have the same set up. I have 61.5 hooked to port3 and 129 to port 4. When I do signal strength it shows 61.5 for VOOM, etc.

 

[lakebum431]

Interesting. So it goes in order of the switch ports?

 

[RBODYMAN]

Thank you for your reply. I'll go up on the roof and check the 44 switch and make sure 61.5 is before 129.

 

[rdinkel]

My 211 favors 129, but the instant that signal turns too weak, the 211 switches to 61.5

 

[RBODYMAN]

I swithced 61.5 to port 1 and 129 to port 2. going to menu 6 1 1 (check switch) still shows 622 using 129 for high def channels. My signal strengh is barely acceptable on 129 while 61.5 is much stronger. Any other ideas?

 

[Claude Greiner]

I swithced 61.5 to port 1 and 129 to port 2. going to menu 6 1 1 (check switch) still shows 622 using 129 for high def channels. My signal strengh is barely acceptable on 129 while 61.5 is much stronger. Any other ideas?

Disconnect your 129 feed

 

[gdarwin]

Disconnect your 129 feed

Same thing I did.

 

[RBODYMAN]

Unfortunately I would then lose the la local HD stations.