HopperGo Reset Button On Unit

[rlee22]

Does anyone know how do you reset hoppergo to default settings from the unit , not from Dishanywhere
I have tried to hold button down for a few seconds and then tried for 30 seconds, but the unit still does not reset
is there a proper way to reset ?

 

[spoiler1041]

Does anyone know how do you reset hoppergo to default settings from the unit , not from Dishanywhere
I have tried to hold button down for a few seconds and then tried for 30 seconds, but the unit still does not reset
is there a proper way to reset ?

Isn't there a tiny hole for a pin next to power button?

It's on the back... labeled reset.

 

[rlee22]

Yes, the button on back of the hoppergo is the button I am pressing.
I have tried to have the hoppergo on then pressing for a few seconds and then turn off then trying to do same thing but holding reset for 30 seconds , but it is still not resetting , the wifi password for the hoppergo is not going back to the default password which is myHopperGO

 

[spoiler1041]

Yes, the button on back of the hoppergo is the button I am pressing.
I have tried to have the hoppergo on then pressing for a few seconds and then turn off then trying to do same thing but holding reset for 30 seconds , but it is still not resetting , the wifi password for the hoppergo is not going back to the default password which is myHopperGO

I thought it was HopperGo.

Nope... myHopperGo. Hmmm

 

[spoiler1041]

Yes, the button on back of the hoppergo is the button I am pressing.
I have tried to have the hoppergo on then pressing for a few seconds and then turn off then trying to do same thing but holding reset for 30 seconds , but it is still not resetting , the wifi password for the hoppergo is not going back to the default password which is myHopperGO

Try 60 seconds.

 

[BrianL@Dish]

You would do this from Dish Anywhere. Select settings bottom right, select HopperGo, then select Reset HopperGo, then select Reset. https://www.mydish.com/support/products/hoppergo/how-to-set-preferences/reset-to-factory-defaults

 

[spoiler1041]

You would do this from Dish Anywhere. Select settings bottom right, select HopperGo, then select Reset HopperGo, then select Reset. https://www.mydish.com/support/products/hoppergo/how-to-set-preferences/reset-to-factory-defaults

Kinda hard to do if you don't't have the wifi password which I assume is why he wants to reset it in the first place.

 

[JSheridan]

Kinda hard to do if you don't't have the wifi password which I assume is why he wants to reset it in the first place.

I don't think you need the HopperGo password to access the settings in DishAnywhere.

 

[spoiler1041]

I don't think you need the HopperGo password to access the settings in DishAnywhere.

It says "connect to hoppergo to access hoppergo settings". So I guess you do have to log in first.

 

[JSheridan]

It says "connect to hoppergo to access hoppergo settings". So I guess you do have to log in first.

If the HopperGo is connected to the Hopper then DishAnywhere will let you change the settings. I just did it.

 

[spoiler1041]

If the HopperGo is connected to the Hopper then DishAnywhere will let you change the settings. I just did it.

Well he didn't say hook it to the H3 first....

 

[JSheridan]

Well he didn't say hook it to the H3 first....

 

[spoiler1041]

Does anyone know how do you reset hoppergo to default settings from the unit , not from Dishanywhere
I have tried to hold button down for a few seconds and then tried for 30 seconds, but the unit still does not reset
is there a proper way to reset ?

If you are avoiding a reset through Dishanywhere app due to forgotten password you can skip the password by connecting to the H3 first.

In case you skipped the fun above.

I just know you are gonna come back and say "but I'm out of town so I can't connect to the H3". In 3.2.1....

Well if this is a password issue a new password can be entered w/o knowing the old one if connected to the H3. No reset needed.

 

[rlee22]

If you are avoiding a reset through Dishanywhere app due to forgotten password you can skip the password by connecting to the H3 first.

In case you skipped the fun above.

I just know you are gonna come back and say "but I'm out of town so I can't connect to the H3". In 3.2.1....

Well if this is a password issue a new password can be entered w/o knowing the old one if connected to the H3. No reset needed.

Yes, I would like to know how to reset the HopperGo unit, without being hooked to hopper 3 or dishanywhere
there is a reset button on back of the HopperGo and I would like to know what you have to do to do a reset of the unit.