Hopper 381

[gpguitarman1]

Received H381 update. There is a new home screen. It comes up semi transparent over the viewing screen. Haven't noticed any issues so far.

Sent from my SM-S911U using Tapatalk

 

[dweber]

Updated both of my Hopper3 receivers to H381 and my Joey3 to J581.
New Home Screen.


Sent from my iPhone using Tapatalk

 

[Jon J]

Got it three days ago. Still not sure I care for the "Home Screen" and other associated stuff.

 

[bnewt]

Of all the things that they could correct, they screw around with something that at least worked like it shoud

 

[telstar_1]

Tell me more about what they could correct but haven't.

 

[Conway]

I wish they would fix the OTA scan speed and slow it down some to where it will grab all signals available. I have a good strong signal from one OTA and it most of the time skips.

 

[Jon J]

Of all the things that they could correct, they screw around with something that at least worked like it shoud

Found a way to go back to the old, familiar, uncluttered, easy to use Home Screen(s). Color me happy.

 

[thomasjk]

Found a way to go back to the old, familiar, uncluttered, easy to use Home Screen(s). Color me happy.

How. I don't like the new screen?

 

[Jon J]

How. I don't like the new screen?

Go to Settings/Appearance
Switch Home Screen to Classic

 

[thomasjk]

Go to Settings/Appearance
Switch Home Screen to Classic

Thanks. I'll do that when the power comes back.

 

[navychop]

I’m still on 380. You folks are giving me something “to look forward to.”

Sigh.

 

[FLEABttn]

It's different but I think I like it. Time will tell.

 

[bluegras]

I got the new software yesterday

 

[Jim5506]

Looks like they fixed something that was not broken.

 

[TheKrell]

It's different but I think I like it. Time will tell.

It's much more ponderous coming up. I think it's downloading icons (or perhaps the whole home screen) off the Internet.

 

[Almighty1]

Josh.M and brittanygarden

Forced updated about 8 hours ago, right before the nightly 1AM Pacific Time update on the Hopper H3 on H380 with Hopper Plus on P13013 to H381.

Have the same issue as mentioned with H380 after updating.
The bar chart shows the DVR % is visible which for me is 100% even though there is 120GB of free space left on the internal HDD.

So still the one major issue:

Issue #1
H380 still has the issue where 119GB-120GB free is considered 100% full on the HDD so the last 119GB-120GB can't be used at all. The fix is either make it available with the correct % remaining or treat the HDD as 120GB less in capacity so the % meter for what's used is correct.

Also manually updated the Hopper Plus software from P13013 to P13103.