I had a hard drive failure on my H3 and replaced it. The 650 was working fine with the original, which had replaced a 612dvr, but did not work with the replacement. I went to the Harmony Desktop software, and in fact I must never have changed it, because it was set and working as a 612 still on the remote. So I changed it to the H3 with Sling, the software found it as such, but it won't work. Anyone got any insight into this? Logitech would be happy to help me on "pay by case" basis, awfully nice of them... Thanks.
Hopper 3 Sling with Logitech 650 remote
- Thread starter Mark Ruggiero
- Start date
- Latest activity Latest activity:
- Replies 14
- Views 2K
take your Hopper remote and go to settings, remote control settings & go down to infrared reception and turn on.
Well done! I must have figured that out for the original hopper and forgotten, imagine that. Many thanks.
FYI, I have two 650s for my HWSes. They don’t seem to be holding up very well and I’ll have to look for replacements. Maybe go the hub route.
Have you considered what you’d use as a replacement if it died?
Sent from my iPhone using Tapatalk
Have you considered what you’d use as a replacement if it died?
Sent from my iPhone using Tapatalk
I just ordered up a 665 for my neighbor. It is the direct replacement for the 650.
Amazon product ASIN B077Q9C8T8
Thank you for the welcome, and again for the advice. I really haven't thought about it, and this 650 is I'm going to say prolly 8-10yo, so I may get to thinking about it any day now! I've always liked the Logitech, but they're pricey of course. This one owes me nothing I guess. The main concern for me is always will the wife be able to figure it out. How about you?
Lol and I just took a quick look myself. agree the 665 looks like would ease the learning curve considerably for her!
Been using the 665 for quite awhile now with no problems. My old 650 never did seem to work correctly.
I finally upgraded to the Hopper3 from the HWS. I found this thread after fooling with the Harmony 650 programing for half a day. Thanks much, I should have searched first. I still have one question. How do I program the remote to turn on the Hopper3, when I push watch tv? All the functions on the remote control the Hopper3 except on and off. In the app, you can choose fix the on/off function, but I do not know which to chose. In the change device settings/power settings, do I chose turn off the device or leave the device on, since the Hopper3 does not turn off, it just goes into standby. I have tried several option and none work.
Similar threads
