Highest Quality Signal For A microHD?)

avenger · Mar 21, 2014

What would be the highest quality signal expected for a well peaked dish/LNB using the microHD receiver?

Thank You.

KE4EST · Mar 21, 2014

about 85

. Raine · Mar 21, 2014

In the eighties, think that I may have seen 90, once or twice, on my 9' C band dish. My 76 cm Ku dish is usually around 70.

JFOK · Mar 22, 2014

avenger said:
What would be the highest quality signal expected for a well peaked dish/LNB using the microHD receiver?

Thank You.

I get 86 with my 7.5 dish parked on Anik 1, which is right overhead.

Corrado · Mar 23, 2014

With my long cable runs and complex switching setup, most Q readings end up in the upper 70s with a few in the 80s.

northgeorgia · Mar 23, 2014

Ditto.

Corrado said:
With my long cable runs and complex switching setup, most Q readings end up in the upper 70s with a few in the 80s.

Tron · Mar 24, 2014

Most I've ever seen on my microHD was a reading in the low 80s for quality.

avenger · Mar 26, 2014

Thanks guys, sorry for not answering earlier. I am getting between 76 and 78 quality reading using the 1.2m free Ku dish and lnbs.

Wescopc · Mar 26, 2014

avenger said:
Thanks guys, sorry for not answering earlier. I am getting between 76 and 78 quality reading using the 1.2m free Ku dish and lnbs.

Nothing wrong with those numbers - same as I get with a 1.2m motorized dish.
Bob